35772 Product Support PRD: System Pressure Out of Range: Reading=<Low range limit>, Low=<High range limit>, High=<Current value> (<Analog group name>) Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 This error indicates that the system pressure is out of range. Check the air hose connected to the machine and ensure that it has sufficient air pressure. Check the system pressure gauge on the machine to see the pressure reading. Adjust external air supply if necessary. This error is reported. The system pressure has dropped below or risen above the allowable range. The system pressure threshold parameter ("prd2 systhresh", if supported) is not set properly for this machine. Low range limit. - The lower limit for the analog bit. High range limit. - The upper limit for the analog bit. Current value. - The current value of the analog bit. Analog group name. - The group name for the analog bit. 13-FEB-2002 Created. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:06 2008 PST